Lun, 25 Mar 2013
Urt 4.2.010
Un poco tardia la noticia, pero noticia al fin:
Changelog
• Added g_maxWallJumps CVAR for Jump Mode only
• Preloading radio sounds and other misc sounds to avoid client freezes when using them
• Fixed the ClientJumpTimerStopped log event that was returning a time of 0 secs
• Fixed negative enemy counter in mini scoreboard in FFA/LMS gametypes
• Not showing the UI cursor when loading a map anymore
• Fixed big jump maps loading failure
• Fixed ut_weaptoggle behavior
• Not checking bots inactivity timers anymore
• Added /ignore and /ignorelist commands
• Fixed CAH miniscoreboard
• Fixed Jump Run timer not displayed correctly while spectating a player
• Fixed miniscoreboard not displaying player DEAD/ALIVE status correctly
• Disabled auth account check for bots to avoid auth-reject when auth_notoriety > 0
• Don't have g_teamAutoJoin affect bot's team
• Fixed spectator being switched from follow to free after map_restart if following a client
• Fixed server browser 'Auth' and 'Password' filters
• Added g_maxJumpRuns CVAR for JUMP mode only (available when g_matchMode is 1)
• Changed some JUMP in-game messages
• New log format for Jump mode entities actions
• Fixed a bug in save and load command (player view angles are now reset correctly)
• Fixed blue armband showing on red team players minimap arrows
• Updated the Glock sounds
• Fixed a wall that you could be shot through in Turnpike
• Added client-side skin forcing
• Added six new skin sets
• New player setup menus
• Fixed issue with shader stage directive 'alphaGen'
• Added TTimo's QuakeLive-style mouse acceleration
Animations
• Both male and female animations updated
• Collision reporting improvements
TTimo's QuakeLive-style mouse acceleration
To enable it, set cl_mouseAccelStyle 1 (0 is the default/legacy behavior).
New style is controlled with 3 cvars:
• sensitivity
• cl_mouseAccel
• cl_mouseAccelOffset
The old code (cl_mouseAccelStyle 0) can be difficult to calibrate because if you have a base sensitivity setup, as soon as you set a non zero acceleration your base sensitivity at low speeds will change as well. The other problem with style 0 is that you are stuck on a square (power of two) acceleration curve.
The new code tries to solve both problems:
Once you setup your sensitivity to feel comfortable and accurate enough for low mouse deltas with no acceleration (cl_mouseAccel 0), you can start increasing cl_mouseAccel and tweaking cl_mouseAccelOffset to get the amplification you want for high deltas with little effect on low mouse deltas.
cl_mouseAccel is a power value. Should be >= 1, 2 will be the same power curve as style 0. The higher the value, the faster the amplification grows with the mouse delta.
cl_mouseAccelOffset sets how much base mouse delta will be doubled by acceleration. The closer to zero you bring it, the more acceleration will happen at low speeds. This is also very useful if you are changing to a new mouse with higher dpi, if you go from 500 to 1000 dpi, you can divide your cl_mouseAccelOffset by two to keep the same overall 'feel' (you will likely gain in precision when you do that, but that is not related to mouse acceleration).
================
IMPORTANTE
================
Frozend Sand recomienda hacer una instalacion LIMPIA de esta version, ya que parece que cambiaron algunas cosas.
Head over to the download area and pickup the NEW UrTUpdater.
It looks exactly the same as the previous version but it's very different!
We STRONGLY recommend doing a clean install. However, if you can't or don't want to do this, you can simply update any 4.2 install.
Como siempre, se aconseja bajarlo del sitio oficial: http://www.urbanterror.info/downloads/
Changelog
• Added g_maxWallJumps CVAR for Jump Mode only
• Preloading radio sounds and other misc sounds to avoid client freezes when using them
• Fixed the ClientJumpTimerStopped log event that was returning a time of 0 secs
• Fixed negative enemy counter in mini scoreboard in FFA/LMS gametypes
• Not showing the UI cursor when loading a map anymore
• Fixed big jump maps loading failure
• Fixed ut_weaptoggle behavior
• Not checking bots inactivity timers anymore
• Added /ignore and /ignorelist commands
• Fixed CAH miniscoreboard
• Fixed Jump Run timer not displayed correctly while spectating a player
• Fixed miniscoreboard not displaying player DEAD/ALIVE status correctly
• Disabled auth account check for bots to avoid auth-reject when auth_notoriety > 0
• Don't have g_teamAutoJoin affect bot's team
• Fixed spectator being switched from follow to free after map_restart if following a client
• Fixed server browser 'Auth' and 'Password' filters
• Added g_maxJumpRuns CVAR for JUMP mode only (available when g_matchMode is 1)
• Changed some JUMP in-game messages
• New log format for Jump mode entities actions
• Fixed a bug in save and load command (player view angles are now reset correctly)
• Fixed blue armband showing on red team players minimap arrows
• Updated the Glock sounds
• Fixed a wall that you could be shot through in Turnpike
• Added client-side skin forcing
• Added six new skin sets
• New player setup menus
• Fixed issue with shader stage directive 'alphaGen'
• Added TTimo's QuakeLive-style mouse acceleration
Animations
• Both male and female animations updated
• Collision reporting improvements
TTimo's QuakeLive-style mouse acceleration
To enable it, set cl_mouseAccelStyle 1 (0 is the default/legacy behavior).
New style is controlled with 3 cvars:
• sensitivity
• cl_mouseAccel
• cl_mouseAccelOffset
The old code (cl_mouseAccelStyle 0) can be difficult to calibrate because if you have a base sensitivity setup, as soon as you set a non zero acceleration your base sensitivity at low speeds will change as well. The other problem with style 0 is that you are stuck on a square (power of two) acceleration curve.
The new code tries to solve both problems:
Once you setup your sensitivity to feel comfortable and accurate enough for low mouse deltas with no acceleration (cl_mouseAccel 0), you can start increasing cl_mouseAccel and tweaking cl_mouseAccelOffset to get the amplification you want for high deltas with little effect on low mouse deltas.
cl_mouseAccel is a power value. Should be >= 1, 2 will be the same power curve as style 0. The higher the value, the faster the amplification grows with the mouse delta.
cl_mouseAccelOffset sets how much base mouse delta will be doubled by acceleration. The closer to zero you bring it, the more acceleration will happen at low speeds. This is also very useful if you are changing to a new mouse with higher dpi, if you go from 500 to 1000 dpi, you can divide your cl_mouseAccelOffset by two to keep the same overall 'feel' (you will likely gain in precision when you do that, but that is not related to mouse acceleration).
================
IMPORTANTE
================
Frozend Sand recomienda hacer una instalacion LIMPIA de esta version, ya que parece que cambiaron algunas cosas.
Head over to the download area and pickup the NEW UrTUpdater.
It looks exactly the same as the previous version but it's very different!
We STRONGLY recommend doing a clean install. However, if you can't or don't want to do this, you can simply update any 4.2 install.
Como siempre, se aconseja bajarlo del sitio oficial: http://www.urbanterror.info/downloads/
